News

  • 0
  • 0

Global concrete foaming agent market trend 2024-2030 What is the advantages of foam cement insulation layer? by Newsfk-leotar

Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles.  

German Vice-Chancellor, minister of economy and climate protection, said Germany's gas supplies were secure for now, but he urged consumers and businesses to reduce consumption, saying "every kilowatt of electricity counts." 

Germany's gas network regulator can ration gas if supplies run short. Plants would be the first to be affected. Special treatment will be provided to private families, hospitals, and other important institutions.  

Half of Germany's 41.5 million households use natural gas for heating, and industry consumption accounts for a third of the country's 100 billion cubic meters of gas demand in 2021.  

The price of many energy and commodities like the concrete foaming agent could be affected.


What is Foam Cement?

Foam cement is a kind of new light insulation material containing a large number of closed pores. It is made by firstly fully foaming the concrete foaming agent with mechanical methods, then evenly mixing the foam with the cement slurry, conducting cast-in-place construction, or mold forming through the pumping system of the foaming machine. Finally, after natural maintenance, it is formed.

It belongs to a kind of bubble-shaped adiabatic material. The outstanding characteristic is that the closed foam holes inside the concrete can make concrete light and heat preservative and insulate.

 

Advantages of Foam Cement Insulation Layer

Using foam cement to make roof insulation and external wall insulation, instead of polystyrene (benzene board) and other insulation materials, has incomparable insulation performance and structural layer adhesion performance, it is convenient for construction, environmentally friendly, efficient, time-saving, etc.

The practice has proved that foam cement has properties of good thermal insulation, heat preservation, sound insulation, light load, better than other light solid plastic extruded perlite, ceramsite, asbestos products, and other thermal insulation materials, with simple operation, high degree of mechanization, saving time, labor characteristics. Foamed cement can be transported by mechanical vertical pipeline, which shortens the working hours and improves the efficiency by 6~10 times more than other ways.

Besides, using foam cement as roof thermal insulation material, makes the adhesion between the heat insulation layer and the floor surface greatly improved.

 

In the past, most floor heating construction uses benzene board as the insulation layer, which cannot be well combined with the original base surface, but there is no effective adhesion, resulting in delamination, empty drum, cracking, etc. Using foam cement body as the thermal insulation layer, the foam cement insulation layer and the original floor of the small uneven base surface filling, and can grasp, grasp the formation of strong adhesion. After construction, the original surface layer basically reaches the required level, which brings convenience to the next process and ensures the overall effect of uniform thickness of the surface layer.

In addition, after using the insulation layer made by the original benzene board for 1-2 years, due to a long time of trampling, it is gradually sinking after bearing force, and it can crack up to 5~10mm. It will also cause damage to the heating pipe and water leakage.  Using foam cement insulation layer can avoid such phenomenon, because the compressive strength of foam cement is higher than benzene board, the advantage is very obvious.

 

At the same time, using the benzene plate as the insulation layer, while heating with the temperature rise, polystyrene (benzene plate) will release residual body benzene and alkylene, etc. Especially in winter heating, doors and windows are closed, air mobility is very poor, and toxic gas cannot be replaced, which will cause certain harm to the human body. The roofing insulation made of foamed cement is not. The cement foaming agent is made of vegetable fatty acids, and the synthetic body is water-soluble. It is a safe environmental health product and will not cause harm to the human body.

Through the research of cement foaming technology, in terms of the heat insulation, adhesion, bearing, environmental health, and other aspects, the foam cement insulation layer is greatly superior to other heat insulation materials, especially suitable for large projects, high floors of convenient, fast on-site production construction. The foam cement insulation layer can also reduce the height of the floor, from the point of view of building structure design, can reduce the cost, and save the cost of the project.

 

Suppliers of Concrete Additives

TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Overall, the demand for concrete foaming agent is on the rise, and future concrete foaming agent will continue to evolve. Although the prosperity of the brand name has rebounded, there are still many outstanding problems in concrete foaming agent, and the concrete foaming agent will develop steadily,if you need concrete foaming agent please contact us.

Inquery us

Our Latest News

Global foamed concrete market trend 2025-2028 How to avoid deformation and cracking of foamed concrete materials by Newsfk-leotar

Foam concrete is prone to cracking during maintenance, mainly caused by unscientific construction and maintenance of the proportioning. Luchuang has a series of solutions. In the years of construction, Luchuang has accurate material proportions for d…

Global 316L powder market trend 2024-2030 What is 316L Stainless Steel Powder? by Newsfk-leotar

The spread of the novel coronavirus is taking a direct hit on the operations of airlines in Asia. About 500,000 flights taking off and landing in mainland China have been canceled since January, according to aviation information company Cerium. Touri…

Global Aerogels, aerogel overview, aerogel applications, aerogel prices, aerogel suppliers market trend 2023-2030 What are the main product forms and applications of aerogels? by Newsfk-leotar

Aerogel is a solid material form, the smallest dense solid in the world. They are widely used in the fields of heat insulation, optics, electricity, catalysis and medicine.…